China best Ad Series Servo Helical Teeth Planetary Gearbox with Good quality

Product Description

1. Ad sequence precision planetary equipment speed reducer Model: AD40, AD60, AD90, AD120,AD160
2. The speed ratio: 3, 4, 5, 7, 9, 10, 15, twenty, twenty five, thirty, 35, 40, 50, 64, 70, eighty, 100, 150, 200, 250, 350, four hundred, five hundred, seven hundred, 1000
3. Phases: A few
Overall performance and attributes:
one. Planetary gear transmission interface making use of isn’t going to incorporate full needle needle bearing, and boost the get in touch with area to improve structural rigidity and output torque
2. PHseries precision planetary gear reducer, with higher precision, large rigidity, high load, substantial performance, higher pace ratio, substantial daily life, low inertia, lower vibration, reduced sounds, minimal temperature rising, stunning physical appearance, construction, light-weight bodyweight, effortless installation, accurate positioning, and many others, and is ideal for AC servo motor, DC servo motor, stepper motor, hydraulic motor of development and gradual down transmission

 

 High precision

Backlash much less than 3 arc minutes, precise positioning

 

 High rigidity and large torque

The use of integral deep groove ball bearings drastically increases rigidity and torque

 

 Strong compatibility

Connector and bushing method can be set up on any non-public servomotor

 

 No leakage of lubricating grease

Use substantial-viscosity, non-separable grease to effectively avert grease leakage

 

 Easy maintenance

In the lifestyle of the item, no require to replace the grease set up, more handy

Type AD-40 AD-60 AD-90 AD-115 AD-142 AD-190 Ratio Stages
T2N
Rated output torque
(Nm)		 5 12.5 37 100 310 1485 3 1
10 28 76 200 605 1780 4
9 24 62 140 420 1345 5
5 15 37 90 270 745 7
6 9 20 45 120 905 10
6 15.5 42 112 340 1070 9 2
6 15.5 42 112 340 1485 15
12 34.5 90 235 680 2035 20
10.5 29 70 155 460 1485 25
12 34.5 90 235 680 2035 30
9 24 62 140 590 1450 35
10.5 29 70 155 460 1485 40
9 24 50 112 340 1070 50
6 17 41 96 308 840 70
6 17 41 96 308 840 100
7.6 19 54 145 422 2590 64 3
15.5 44 110 295 895 2590 80
15.5 44 110 295 895 2590 100
15.5 44 110 295 895 2590 150
13.5 38 89 195 580 1855 200
15.5 44 110 295 895 2596 250
13.5 38 89 195 580 1855 350
10.5 30 50 145 515 1450 400
7.5 22 52 124.5 400 1070 500
7.5 22 52 124.5 400 1070 700
7.5 22 52 124.5 400 1070 1000
emergency stop torque T2not=2T2N
Rotational inertia
(kgm2)		 0.031 0.0135 0.77 2.63 12.14 15.6 3 1
0.022 0.093 0.52 1.79 7.78 16.3 4
0.019 0.078 0.45 1.53 6.07 15.4 5
0.017 0.065 0.39 1.32 4.63 16.1 7
0.016 0.065 0.39 1.32 4.63 15.2 10
0.03 0.131 0.74 2.62 12.14 15.9 9 2
0.023 0.077 0.71 2.53 12.35 15 15
0.019 0.075 0.44 1.5 6.65 15.7 20
0.019 0.075 0.44 1.49 5.81 15.3 25
0.017 0.064 0.39 1.3 6.36 15.2 30
0.016 0.064 0.39 1.3 5.28 16.1 35
0.016 0.064 0.39 1.3 5.28 15.2 40
0.016 0.064 0.39 1.3 4.5 15.2 50
0.016 0.064 0.39 1.3 4.5 15.2 70
0.016 0.058 0.31 1.12 3.53 15.2 100
0.019 0.075 0.5 1.5 7.5 15.4 80 3
0.019 0.075 0.44 1.49 7.4 15.4 100
0.016 0.064 0.39 1.3 6.5 15.2 150
0.016 0.064 0.39 1.3 6.2 15.2 200
0.016 0.064 0.39 1.3 5.7 15.2 250
0.016 0.064 0.39 1.3 5.4 15.2 350
0.016 0.064 0.39 1.3 5.4 15.2 400
0.016 0.064 0.39 1.3 5.2 15.2 500
0.016 0.064 0.39 1.3 5.2 15.2 700
0.016 0.064 0.39 1.3 5.2 15.2 1000
backslash
(arcmin)		 reduced <5 <3 <3 <3 <5 <10   1
standard <10 <8 <8 <8 <10 <15  
reduced <8 <5 <5 <5 <8 <15   2
standard <12 <10 <10 <10 <10 <18  
reduced <10 <8 <8 <8 <10 <18   3
standard <15 <12 <12 <12 <15 <22  
torsional rigidity
(Nm/arcmin)		 0.7 1.8 4.4 9.2 26.7 66.7  
noise dB(A) 55 58 60 65 70 75  
Max.input speed 10000 8000 6000 6000 5000 3500 1-min
Rated input speed 4500 4000 4000 3500 2000 1500 1-min
Max.Radialforce(N) 1850 3400 5300 9550 14000 18000 Stages
Max.Axialforce(N) 1600 3000 4500 8000 11000 15000
Full-load efficiency(%) 96 1
94 2
90 3
 service life (H) 20000  
Weight (Kg) 0.7 1.4 3 7.2 21 35 1
0.9 1.6 3.5 9.2 26 42 2
1.1 1.8 4 11.2 31 56 3
Type AD-40 AD-60 AD-90 AD-115 AD-142 AD-190 Ratio Stages
T2N
Rated output torque
(Nm)		 5 12.5 37 100 310 1485 3 1
10 28 76 200 605 1780 4
9 24 62 140 420 1345 5
5 15 37 90 270 745 7
6 9 20 45 120 905 10
6 15.5 42 112 340 1070 9 2
6 15.5 42 112 340 1485 15
12 34.5 90 235 680 2035 20
10.5 29 70 155 460 1485 25
12 34.5 90 235 680 2035 30
9 24 62 140 590 1450 35
10.5 29 70 155 460 1485 40
9 24 50 112 340 1070 50
6 17 41 96 308 840 70
6 17 41 96 308 840 100
7.6 19 54 145 422 2590 64 3
15.5 44 110 295 895 2590 80
15.5 44 110 295 895 2590 100
15.5 44 110 295 895 2590 150
13.5 38 89 195 580 1855 200
15.5 44 110 295 895 2596 250
13.5 38 89 195 580 1855 350
10.5 30 50 145 515 1450 400
7.5 22 52 124.5 400 1070 500
7.5 22 52 124.5 400 1070 700
7.5 22 52 124.5 400 1070 1000
emergency stop torque T2not=2T2N
Rotational inertia
(kgm2)		 0.031 0.0135 0.77 2.63 12.14 15.6 3 1
0.022 0.093 0.52 1.79 7.78 16.3 4
0.019 0.078 0.45 1.53 6.07 15.4 5
0.017 0.065 0.39 1.32 4.63 16.1 7
0.016 0.065 0.39 1.32 4.63 15.2 10
0.03 0.131 0.74 2.62 12.14 15.9 9 2
0.023 0.077 0.71 2.53 12.35 15 15
0.019 0.075 0.44 1.5 6.65 15.7 20
0.019 0.075 0.44 1.49 5.81 15.3 25
0.017 0.064 0.39 1.3 6.36 15.2 30
0.016 0.064 0.39 1.3 5.28 16.1 35
0.016 0.064 0.39 1.3 5.28 15.2 40
0.016 0.064 0.39 1.3 4.5 15.2 50
0.016 0.064 0.39 1.3 4.5 15.2 70
0.016 0.058 0.31 1.12 3.53 15.2 100
0.019 0.075 0.5 1.5 7.5 15.4 80 3
0.019 0.075 0.44 1.49 7.4 15.4 100
0.016 0.064 0.39 1.3 6.5 15.2 150
0.016 0.064 0.39 1.3 6.2 15.2 200
0.016 0.064 0.39 1.3 5.7 15.2 250
0.016 0.064 0.39 1.3 5.4 15.2 350
0.016 0.064 0.39 1.3 5.4 15.2 400
0.016 0.064 0.39 1.3 5.2 15.2 500
0.016 0.064 0.39 1.3 5.2 15.2 700
0.016 0.064 0.39 1.3 5.2 15.2 1000
backslash
(arcmin)		 reduced <5 <3 <3 <3 <5 <10   1
standard <10 <8 <8 <8 <10 <15  
reduced <8 <5 <5 <5 <8 <15   2
standard <12 <10 <10 <10 <10 <18  
reduced <10 <8 <8 <8 <10 <18   3
standard <15 <12 <12 <12 <15 <22  
torsional rigidity
(Nm/arcmin)		 0.7 1.8 4.4 9.2 26.7 66.7  
noise dB(A) 55 58 60 65 70 75  
Max.input speed 10000 8000 6000 6000 5000 3500 1-min
Rated input speed 4500 4000 4000 3500 2000 1500 1-min
Max.Radialforce(N) 1850 3400 5300 9550 14000 18000 Stages
Max.Axialforce(N) 1600 3000 4500 8000 11000 15000
Full-load efficiency(%) 96 1
94 2
90 3
 service life (H) 20000  
Weight (Kg) 0.7 1.4 3 7.2 21 35 1
0.9 1.6 3.5 9.2 26 42 2
1.1 1.8 4 11.2 31 56 3

Types of Vehicle Gearboxes

In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
gearbox

planetary gearbox

A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.

Straight bevel helical gearbox

The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
gearbox

Coaxial helical gearbox

The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox

Skew bevel helical gearbox

A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
gearbox

Extruder helical gearbox

An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.

Tags: china gearbox | gearbox | gearbox china | gearbox planetary | gearbox servo | gearbox with | helical gearbox | planetary gearbox | planetary servo gearbox | servo gearbox | servo planetary gearbox

Planetary Gearboxes

As one of the planetary gearbox manufacturers, suppliers, and exporters of mechanical products, We offer planetary gearboxes and many other products.

Please get in touch with us for details.

Mail:[email protected]

Manufacturer supplier exporter of planetary gearboxes.

Recent Posts